Knauf Attic Insulation Nationwide

Knauf Attic Insulation: The Boerne Owner’s Guide

We stock and install Knauf attic insulation in Boerne homes, with most attic insulation jobs running between $1,800 and $4,200 depending on square footage and whether air sealing is needed first. Same-day installation is available when we have your spec in our Boerne warehouse, which we usually do for Knauf EcoBatt and Jet Stream product lines. Homeowners typically realize their insulation is failing when upstairs rooms won’t stay cool in July, or when they find compressed, discolored batts in the attic that have settled below the top of the ceiling joists.

Call (830) 529-7780

Which Knauf Models This Applies To

We work with three Knauf product families common in Boerne homes built between 1995 and 2020: EcoBatt glass mineral wool, Jet Stream blown-in fiberglass, and Insulation Board rigid foam used in cathedral ceilings and knee walls. The label matters. EcoBatt batts are color-coded by R-value - pink for R-30, brown for R-38, gray for R-49 - and the facing type is printed on the kraft paper: standard kraft, flame-spread rated, or unfaced for layering. Jet Stream bags carry a lot number and coverage chart that tells us exactly how many bags your attic square footage requires at target thickness.

Here’s the compatibility gotcha we see in Boerne: Knauf EcoBatt high-density batts are 3.5 inches thick for a 2×4 wall cavity, but attic-floor batts at R-38 are 12 inches thick and will compress to R-30 or lower if you stuff them into a 2×8 joist bay. We’ve pulled batts from homes near River Road that lost 20% of their labeled R-value because a previous installer used wall-spec batts in an attic floor. We match the product to the cavity depth, not just the R-value on the bag.

Topside Attic Insulation Boerne is an independent service provider, not affiliated with Knauf. We also stock Reflectix radiant barrier products for attics where summer heat gain is the primary problem.

Signs Your Knauf Attic Insulation Is Failing

• Uneven temperatures between rooms. When batts shift or settle, you get thermal bypass channels. We see this most in Boerne homes with blown-in Jet Stream that wasn’t installed to full labeled depth, leaving thin spots near eaves where wind washing pulls heat through.
• Ice damming or heavy condensation on roof nails. This means warm, moist interior air is reaching the cold roof deck. In Boerne’s variable winter conditions, the culprit is almost always air leakage through top plates and electrical penetrations that insulation alone cannot stop.
• Insulation compressed below joist height. Walkable storage platforms, HVAC work, or rodent activity flatten batts permanently. Compressed fiberglass loses up to half its R-value. We document this with photos and measure remaining thickness against the original spec.
• Discoloration or staining on facing or batts. Brown or black streaks indicate air is moving through the insulation, carrying dust and pollutants. This is a sign your air sealing failed before your insulation did, and replacing batts without sealing first wastes the material.
• Energy bills climbing year over year with no rate change. We compare current usage to the same month three years prior. When consumption rises 15% or more and the HVAC system checks out, the envelope is leaking. We verify with a blower-door test - a pressurization reading that shows, in one number, how much air your building envelope is losing.

Replacement Cost & What’s Included

Most Knauf attic insulation replacements in Boerne run $1,800 to $4,200 for a typical 1,800 to 2,400 square foot home. The range depends on four factors: whether we remove existing material, how much air sealing the attic floor needs, whether we’re adding baffles for vented attics, and whether you choose EcoBatt batts or Jet Stream blown-in.

Our price includes removal and bagging of old insulation, air sealing of top plates, can lights, and penetrations, installation of new Knauf material to full labeled depth, baffles at eaves if required by code, and a Documented Photo Record delivered when we leave. On applicable jobs, we run a blower-door test before and after, then hand you the printed pressure-differential report in pascals. Every job starts with a written price - no work begins without it - under Haven Standard Clause 1. The 365-Day Done Right Promise applies to all completed work.

DIY or Call Us?

There’s no high-tension danger here like a garage door spring, but attic work has its own hazards. You can safely check your insulation depth with a ruler and photograph any discolored or compressed areas. Do not disturb vermiculite insulation - it may contain asbestos, and we use certified abatement contractors for that.

Where DIY goes wrong: Boerne attics hit 140°F in August, and heat exhaustion happens faster than people expect. More critically, blowing Jet Stream to the correct density requires a machine calibrated to Knauf’s spec - too loose and it settles in six months, too tight and you block soffit ventilation. We see both mistakes in homes off Esser Road. And without sealing first, you’re paying for R-value that wind washing will negate.

Seal the envelope first. Then fill it. Call (830) 529-7780 and we’ll walk through what your attic actually needs.

FAQs