CertainTeed Home Energy Audit Nationwide

CertainTeed Home Energy Audit in Boerne: What to Know First

A CertainTeed home energy audit in Boerne typically runs $350-$650 for a full diagnostic package including blower-door test, thermal imaging, and insulation inspection, with same-week scheduling available most of the year. We’re an independent CertainTeed service provider - not affiliated with or authorized by the manufacturer - and we publish before-and-after blower-door numbers on every job so you can verify the result in pascals, not promises. Call (830) 529-7780; a live person answers 24/7, and we’ll deliver a written price before any work starts.

Call (830) 529-7780

This page is for Boerne homeowners who’ve found CertainTeed insulation, roofing, or building products in their home and need to know whether those materials are performing as designed - or whether air leakage, thermal bridging, or moisture intrusion is undermining what the label claims.

How CertainTeed Products Fail - and How We Fix Them

• CertainTeed InsulSafe SP blown-in fiberglass settles below labeled depth in Hill Country heat. We’ve pulled back attic hatches in Boerne homes near River Road to find what was sold as R-38 compacted to R-26 after seven summers of 140°F attic cycling. Our fix: measure settled depth with a ruled probe, calculate true R-value, then air-seal top plates and can-light penetrations before adding new material to the design depth - never over the leaks.
• CertainTeed SmartBatts with moisture-activated dye show false negatives in dry-season audits. The color-change indicator only triggers above 20% wood moisture content, and Boerne’s February humidity can drop to 30% ambient while attic dew points still condense on north sheathing. We run a Delmhorst pin meter at the eaves and a thermal imager to find the wetting the batts missed.
• CertainTeed MemBrain vapor retarder wrinkles and detaches from staples in unconditioned attics. The smart-retarder film relies on contact with the drywall to work; when it sags 4 inches, the perm rating jumps unpredictably. We document the detachment with photos, remove the compromised sheet, and reinstall with cap fasteners on a flat surface - or switch to a smart retarder with better sag resistance if the cavity geometry won’t allow it.
• CertainTeed Cedar Impressions siding creates thermal bypass at the 4-foot lock joints when butt joints aren’t foamed. The hollow PVC profile looks tight, but we’ve traced 180 CFM50 of leakage to a single gable end in a Cordillera Ranch home where the installer skipped the low-expansion foam at the seam. We pull a course, inject, and verify with a smoke pencil.
• CertainTeed Flintlastic SA low-slope roofing membrane shrinks at the perimeter in our UV load, pulling insulation compression at parapet walls. The 60-mil cap sheet contracts 1/8 inch per foot over five years; on a Boerne commercial retrofit we audited, that translated to a 2-inch gap at the parapet where R-30 polyiso was crushed to R-15. We document the compression, calculate the true assembly R-value, and specify a relief detail in our repair scope.

Our CertainTeed Home Energy Audit Process

1. 1
   Call and schedule. A live person answers at (830) 529-7780. We ask the year built, the last insulation work done, and whether you’ve noticed hot rooms, high bills, or musty attic smells. We schedule within the week, sometimes next day.
2. 2
   Arrival and walkthrough. Our technician texts when en route. We inspect the attic hatch, the HVAC closet, and any visible CertainTeed labeling - batts, blown-in, membrane roofing, or siding. We photograph everything before touching it.
3. 3
   Blower-door test. We depressurize the house to 50 pascals and record CFM50 - the single number that tells us how much conditioned air is escaping. In Boerne’s older homes near the Cibolo Nature Center, we regularly see 4,000+ CFM50 before any sealing work.
4. 4
   Thermal imaging and targeted diagnostics. The FLIR shows us where CertainTeed insulation has settled, gotten wet, or been bypassed by air movement. We probe moisture, check duct leakage with a pressure pan, and mark every finding with blue tape.
5. 5
   Written scope and price. Before we leave, you get a flat price, a written scope of work, and a written warranty - Haven Standard Clause 1. No work starts without it. If you have a competing estimate, we’ll read it with you; our Second Opinion is free.
6. 6
   Work, test, document. We seal first, then insulate - in that order. After completion, we run the blower door again and hand you the printed pressure-differential report. The Documented Photo Record goes to your email before the crew leaves.

What CertainTeed Home Energy Audit Costs in Boerne

Most Boerne homes built 1995-2015 with original CertainTeed attic insulation fall in the $4,500-$6,000 range for a full seal-and-insulate package with documented blower-door improvement. We don’t do “call for pricing” - the written price is the Haven Standard, and it’s delivered before anyone lifts a tool. Call (830) 529-7780 for your exact number; estimates are free.

Why Boerne Homeowners Call Topside Attic Insulation Boerne for CertainTeed Work

We’ve sealed and insulated over 9,000 homes since 2016, and a growing share of them came to us after a CertainTeed product didn’t perform to expectation. We don’t blame the material; we diagnose the assembly. Wes Okafor, who learned this trade at Olive-Harvey College and has run blower doors for going on eighteen years, keeps ACCA Manual J in his truck for the kitchen-table conversations about why R-38 in a vented attic floor performs differently than R-38 against roof decking.

Our 365-Day Done Right Promise applies to every job. If the blower-door number doesn’t improve, we find out why and fix it. We also service Reflectix and other brands, so we’re not locked into a single manufacturer’s solutions. Calls are answered by a live person 24/7. Background-checked, uniformed technicians. No voicemail loops. No callback windows measured in business days.

FAQs